|
|
Hybrid Energy Harvesting Device
Rasocha, David ; Rubeš, Ondřej (referee) ; Hadaš, Zdeněk (advisor)
This bachelor theasis is focuses on the design of a hybrid piezoelectric vibratory genera-tor. The main idea is to place a permanent magnet on the end of the piezoelectric beam and to place the coil appropriately in order to make a electromagnetic generator. The coil will generate a electrical voltage on load, when the magnetic field is passing throught coil. The piezoelectric beam will also generate voltage, depending on its deformation. For modeling, Femm, Matlab and Simulink will be used.
|
|
|
Influence of the electron beam trajectory on the surface properties of steel 42CrMo4
Mikuš, Tomáš ; Kouřil, Miloslav (referee) ; Foret, Rudolf (advisor)
The thesis deals with surface quenching of steel 42CrMo4 by electron beam. Influence of technologic parameters and beam deflection on properties and structure of prepared layers is studied. Electron beam surface quenching was applicated with and without melting of the surface. Structures of layers made by electron beam quenching were compared with structures made by laser and electromagnetic induction. Structures and phases were analysed by optical microscopy, SEM and roentgen diffraction. Hardness was measured on hardened layers.
|
|
|
Mechatronic Proposal of Electromagnetic Vibration Power Generator
Jurosz, Pavel ; Houška, Pavel (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with modifications to the construction of vibration-to-electricity energy converter, which is one of possible solutions to problem of sustainable and stable energy source for wireless sensor supply. Upon the exploration of the present state of this problem, new construction of generator is proposed. The aim of this proposal is to enhance the existing generator properties with respect to retention of its dimensions and its weight. Results obtained by simulations of model with proposed parameters are presented and analysed.
|
|
|
Velocity pickup
Konečný, Jan ; Pikula, Stanislav (referee) ; Beneš, Petr (advisor)
This bachelor thesis deals with a proposal of a sensor for measuring relative oscillation of two interacting surfaces. The thesis describes two possible solutions with their advantages and disadvantages, and a patent research. The main part of this bachelor thesis concentrates on inductive position sensor – its attributes and practical proposal.
|
|
|
Magnetic Energy Harvesting Device for Low Excitation Vibration
Szabó, Hugo ; Singule, Vladislav (referee) ; Rubeš, Ondřej (advisor)
This bachelor theasis is focused on a concept of a magnetic energy harvesting device for low exitation frequencies. The device is made out of mechanical and electrical part where mechanical part is made out of two levitating magnets that repent each other and an electrical part is made out of magnetic circuit and a coil whose relative motion induces voltage in the coil. Mathematical model is made in Matlab, Simulink and FEMM. Construction model is made in Inventor.
|
|
|
Wireless Energy Transfer
Lašo, Matej ; Paar, Martin (referee) ; Krbal, Michal (advisor)
The aim of this Bachelor's thesis is to give complex information about wireless energy transfer and its historical evolution. The thesis then continues with describing the devices that are using wireless energy transfer and the effects this method is having on human health and the ways protecting against its effects. The second part, concerning practical measurements, aims at measuring on special pads using the wireless transfer on which I have made all my calibrations and measuring of magnetic flux and efficiency of this transfer.
|
|
|
Trackside vibration energy harvester
Beňo, Martin ; Sosna, Petr (referee) ; Rubeš, Ondřej (advisor)
This diploma thesis is about the design of a vibrating energy harvester for a railway track. The railways are constantly being innovated and require a large number of sensors to achieve a high level of security and predictive maintenance. Such sensors need to be powered by a certain power source. A conventional energy source could be replaced by a vibrating energy harvester. The work discusses not only the analysis of suitable parameters, but also the realization of the energy harvester. At the end of the work, a functional concept is presented and the proven results are also taken into account.
|
|
|
Automobile Charging System
Kovačík, Lukáš ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
This Bachelor thesis analyzes recharging systems in automobile. It explains main components of electric circuit used in automobile alternators, functions of each part of the alternator, comparison of the most common types of alternators. Main focus is to analyze and inovate the area of power losses, which determines the efficiency of each type. Final part of this thesis describes the analytical calculation of a three-phase generator.
|
|
|
Walking as alternative source of electrical energy
Smilek, Jan ; Hejč, Tomáš (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with problematics of using the Energy Harvesting principles for generating power from the human walking. Own acceleration measurement during walking was made on various locations of human body to provide data for self-developed MATLAB/Simulink energy balance script. The script clearly sets the possibilities and limits of vibration generator used in this application. Conclusions of the energy balance were used to specify requirements for development of vibration generator and few possible conceptions, working on frequencies close to 2 Hz and acceleration amplitudes 0,3 g, were presented, or simulated.
|
|
|
Coilgun
Kovařík, Martin ; Pavlík, Michal (referee) ; Šteffan, Pavel (advisor)
This bachelor’s thesis describes the design and construction of electromagnetic gun for testing projectiles from different ferromagnetic materials with maximal power 19 J. Conventional projectile propulsion mechanisms include the use of compressed air or explosion which places theoretical limits on the maximum muzzle velocity limited by laws of thermodynamics. The electromagnetic coil gun, explores the use of electromagnetism in accelerating projectiles which offers a much higher theoretical limit on muzzle velocity. In addition of an electromagnetic acceleration is possible to regulate output velocity/energy of projectile, and acceleration applied on projectile.
|
guest ::
